Ajantox A-PG
Ajantox A-PG
Description
It is a Premium GradeTiO2 pigment having high brightness, tinting strength, good colour, and excellent dispersion for consistent optical performance. The iron content is less and the pigment is fine milled.
It conforms to IS 411:2020 standards.
Application
This product is highly suitable for Plastic Masterbatch applications. It has been substantially used for end applications like Monolayer Films, Thicker 3 Layer films, Sheets & Profiles. It has a very good Whiteness Index, Dispersibility and Filterability. Especially recommended for high opacity tough films.
Chemical name
Titanium dioxide – TiO2
Crystalline structure – Anatase
No surface coating.
CAS No- 1317-70-7
PIGMENTARY CHARACTERISTICS / CHEMICAL COMPOSITION
| Characteristics | Requirement | Typical result |
| Volatile matter at 105ºC | 0.30 % (max) | 0.18 |
| Residue on 45 micron (325 mesh IS sieve) | 0.04 % (max) | 0.02 |
| Oil absorption | 15 -30% | 22.68 |
| Colour in Oil | Close match to the approved sample | Close match |
| Reducing power | Not inferior | Better |
| Relative density at 27ºC | 3.7 – 3.9 | 3.76 |
| Water soluble matter (max) | 0.50 % | 0.4 |
| pH of 20% pigment slurry in distilled water | 6 - 8 | 7.3 |
| Titanium Dioxide | 98.0% (min) | 98.4 |
| Fe | 100 ppm (max) | 84 |
| P2O5 | 0.50% (max) | 0.30 |