Ajantox A-PG
Ajantox A-PG
Ajantox A (PG) – Anatase Premium Grade Titanium Dioxide.
This product is highly suitable for Plastic Masterbatch applications. It has been substantially used for end applications like Monolayer Films, Thicker 3 Layer films, Sheets & Profiles. It has a very good Whiteness Index, Dispersibility and Filterability. Especially recommended for high opacity tough films.
Name of Chemical : Titanium Dioxide (Anatase Grade)
PIGMENTARY CHARACTERISTICS / CHEMICAL COMPOSITION
Characteristics | Requirement | Typical result |
Volatile matter at 105ºC 0.5 % (max) | 0.30 % (max) | 0.18 |
Residue on 45 micron (325 mesh IS sieve) | 0.04 % (max) | 0.02 |
Oil absorption | 15 -30% | 22.68 |
Colour in Oil | Close match to the approved sample | Close match |
Reducing power | Not inferior | Better |
Relative density at 27ºC | 3.7 – 3.9 | 3.76 |
Water soluble matter (max) | 0.50 % | 0.4 |
pH of 20% pigment slurry in distilled water | 6 - 8 | 7.3 |
Titanium Dioxide | 98.0% (min) | 98.4 |
Fe | 100 ppm (max) | 84 |
P2O5 | 0.50% (max) | 0.30 |